ICX420GAP Manual
Below is a listing of the description of the fields on the Radio display.
Radio
Status
Mode
Channel
Channel bandwidth
Primary channel
Short guard interval supported
STBC mode
Protection
Beacon interval
DTIM interval
Fragment threshold
RTS threshold
Maximum stations
Transmit power
Fixed multicast rate
Rate sets
Choose the configured RF.
Enable/disable the RF.
The PHY standard used by RF.
Choose the channel.
The channel bandwidth of 802.11n mode.
The mode of the primary channel (only the 802.11n
mode is supported)
Configure the short guard. (only the 802.11n mode is
supported)
Configure the STBC mode. (only the 802.11n mode is
supported)
Configure the protection function.
Configure the Beacon interval.
Configure the DTIM interval.
Configure the fragment threshold.
Configure the RTS threshold.
Configure the maximum number of associated
stations.
Configure the percentage of the RF transmission
power.
Configure the supported multicast rate.
Configure the transmission rate set and the basic
broadcast rate set that supported by RF.
29