ICC ICX400GAP Web Manual page 26

ICX420GAP Manual
Below is a description of the advanced configuration items.
Host name
MAC Address
Management VLAN ID
Untagged VLAN
Untagged VLAN ID
Connection Type
Static IP Address
Subnet Mask
Default Gateway
DNS Servers
IPv6 Admin Mode
IPv6 Auto Config Admin
Mode
IPv6 Connection Type
Static IPv6 Address
Static IPv6 Address Prefix
Length
IPv6 Autoconfigured Global
Addresses
IPv6 Link Local Address
Default IPv6 Gateway
IPv6 DNS Server
The host name of the AP.
The MAC address of the Ethernet interface of AP.
The management VLAN is used to access the VLAN
which is associated with the IP address of AP.
If the untagged VLAN was disabled, all the packets will
be marked with the same VLAN number.
The packet transmitted in this VLAN has no tagged
VLAN number.
Configure the IP address obtaining of AP.
Configure the static IP address. If the IP obtaining is
DHCP, this property cannot be used.
Configure the subnet mask. If the IP obtaining is DHCP,
this property cannot be used.
Configure the default gateway. If the IP obtaining is
DHCP, this property cannot be used.
Configure the DNS mode. Under the manual appointed
mode, the DNS address can be configured to analyze
the domain name.
Configure the getting mode of IPv6.
Configure the IPv6 automatic address. If it is disabled,
this function is not enabled.
Configure the mode of getting the IPv6 address.
Configure the static IPv6 address of AP.
Configure the prefix length of static IPv6 address.
Shows the IPv6 auto configured global addresses.
Shows the IPv6 link local address of AP.
Shows the default IPv6 gateway of AP.
Configure the address retrieval mode of the IPv6 DNS
server; configure the static IPv6 DNS server address.
26