ICC ICX400GAP Web Manual page 36

ICX420GAP Manual ICX420GAP Manual ICX420GAP Manual
Satellite AP configuration through CLI Satellite AP configuration through CLI Satellite AP configuration through CLI
Telnet the AP which needs to be selected as Satellite and enter the following Telnet the AP which needs to be selected as Satellite and enter the following Telnet the AP which needs to be selected as Satellite and enter the following
commands: commands: commands:
ICX420GAP# set wds wds0 wds-mode satelliteap ICX420GAP# set wds wds0 wds-mode satelliteap ICX420GAP# set wds wds0 wds-mode satelliteap
ICX420GAP# set wds wds0 wds-ssid wds0 ICX420GAP# set wds wds0 wds-ssid wds0 ICX420GAP# set wds wds0 wds-ssid wds0
ICX420GAP# set wds wds0 remote-mac [MAC address of RootAP] ICX420GAP# set wds wds0 remote-mac [MAC address of RootAP] ICX420GAP# set wds wds0 remote-mac [MAC address of RootAP]
ICX420GAP# set wds wds0 wds-security-policy wpa-personal ICX420GAP# set wds wds0 wds-security-policy wpa-personal ICX420GAP# set wds wds0 wds-security-policy wpa-personal
ICX420GAP# set wds wds0 wds-wpa-personal-key 123456789 ICX420GAP# set wds wds0 wds-wpa-personal-key 123456789 ICX420GAP# set wds wds0 wds-wpa-personal-key 123456789
ICX420GAP# set wds wds0 wds-status up ICX420GAP# set wds wds0 wds-status up ICX420GAP# set wds wds0 wds-status up
Configuration through GUI Configuration through GUI Configuration through GUI
Root AP configuration: Root AP configuration: Root AP configuration:
1. On the AP that is chosen as a Root AP go to the web interface of the AP and click 1. On the AP that is chosen as a Root AP go to the web interface of the AP and click 1. On the AP that is chosen as a Root AP go to the web interface of the AP and click
on the WDS page. on the WDS page. on the WDS page.
2. Select the radio (1-2) on which the wireless bridging needs to be configured. 2. Select the radio (1-2) on which the wireless bridging needs to be configured. 2. Select the radio (1-2) on which the wireless bridging needs to be configured.
a. The ICX420GAP is a dual band AP supporting 2.4 GHz and 5 GHz bands a. The ICX420GAP is a dual band AP supporting 2.4 GHz and 5 GHz bands a. The ICX420GAP is a dual band AP supporting 2.4 GHz and 5 GHz bands
simultaneously simultaneously simultaneously
3. Select WDS mode as RootAP. 3. Select WDS mode as RootAP. 3. Select WDS mode as RootAP.
4. Enter the MAC address of the satellite AP (Remote AP) in the Remote-MAC field. 4. Enter the MAC address of the satellite AP (Remote AP) in the Remote-MAC field. 4. Enter the MAC address of the satellite AP (Remote AP) in the Remote-MAC field.
5. Select the security and enter the WPA security key. (Note: the WDS SSID and 5. Select the security and enter the WPA security key. (Note: the WDS SSID and 5. Select the security and enter the WPA security key. (Note: the WDS SSID and
security key should be same on both the Root AP and Satellite AP in order to connect security key should be same on both the Root AP and Satellite AP in order to connect security key should be same on both the Root AP and Satellite AP in order to connect
them.) them.) them.)
36 36 36