Setting The Time; Key Lock - Tebas BP-100HS-A Installation And Maintenance Manual

Check current temperature:
◎ Under running, press "
water/ambient/compressor/copper temperature.

Setting the time

press "CLOCK" botton to set the time. The time displayed blinks, press "CLOCK" botton again
and then use the arrow "
press "CLOCK" botton again. Once the correct time is set. press "CLOCK" botton again the end.
The display returns to normal after 8 seconds.
Timer switch ON and Timer switch OFF:
Once the time has been set correctly, this function allows a machine start time and a machine stop
time to be programmedduring the day.
Press "TIMER ON" botton the time displayed and "ON" to blink, press "TIMER ON" botton again
Change the hour using the "
the minutes using the "
Press "TIMER OFF" botton the time displayed and "OFF" to blink, press "TIMER OFF" botton
again Change the hour using the "
change the minutes using the "
The time setting is from 0 to 24 hours to recycle.
When the setting time for on and off is the same,the setting time is not available.
When the setting timer, Press "CLOCK" to deactivate TIMER.
Coercive Defrosting (Only on heating mode):
1. Press " MODE " 10 seconds when the unit is running, the unit will go into coercive defrosting
function.
2.
When it arrives in defrosting exit criteria, defrosting is stopped.
3.
After exiting the defrosting, the unit will stop 30 seconds, then it will heat water again.

Key lock:

Press "SET" and "
Press "SET" and "
" or " " to check the current status of the unit. You can check
" and " " to change the hour setting. To change the minutes,
" and " " keys. Press "TIMER ON" botton again to change
" and " " keys. Press "TIMER ON" botton again the end.
" and "
" and "
" 5 seconds to set keylock.
" 5 seconds again to release keylock.
" keys. Press "TIMER OFF" botton again to
" keys. Press "TIMER OFF" botton again the end.
9