Hydraulic Connections - Tebas BP-100HS-A Installation And Maintenance Manual

Hydraulic connections:

respect imperatively
Connection is carried out with a by-pass located on
the circuit of filtration, upstream appliances of the
chemical treatment of water.
Connect intake/outlet water PVC pipes DN50 to the
openings of the machine in following the inlet / outlet
indications (grease the worms before screwing)
Swimming-Pool
To
By-pass
Filter
Technical room
Chemical treatment
Drain of the
condensates: insert
the plastic elbow in
the hole of
evacuation of the
bottom and connect
the pipe if need.
Heat Pump
Blowing