Terminal Clips On The Technical Components - Jesco TOPAX DX Operation & Maintenance Instructions Manual

Chapter4:Mountingbuild-inhousing
4.6Terminalclipsonthetechnicalcomponents
78403
5-fold input block
- +
+ - + -
+ - + - + - + - + - + - + -
20 mA Power Outputs
78402
mainboard
Fig. 4.14: Rear side of the housing with the main board, the input module
5-fold "78403", the input module 3-fold "78404", the output board
"78399" and the partly hidden PC interface "78406".
Mainboard(orderno.78402)
terminal Function
Analogue power outputs 0/4...0 mA (see chapter 10 also)
1 + Measurement output
0/4...0 mA
 -
3 + Measurement output
0/4...0 mA
4 -
5 + Measurement output
0/4...0 mA
6 -
7 + Measurement output
0/4...0 mA
8 -
9 + Measurement output
0/4...0 mA
10 -
11 + Measurement output
0/4...0 mA
1 -
13 + Continuous controller
output
14 -
0/4...0 mA
15 + Continuous controller
output
16 -
0/4...0 mA
1 | Operation Manual TOPAX DX | BA-40100
78404 power generator
3-fold
input block
Plugin connector
to the display circuit board
78399
78
DO7 DO6 DO5
77
76
+ - +
-
+
+ -
78406
Free chlorine
pH value
Redox
Temperature or programmed as
controller output
bonded chlorine or programmed as
controller output
conductivity or programmed as
controller output
programmed as controller output
programmed as controller output
output block
- +
-
Digitale Outputs
PC interface RS 485(hidden)
NOTICE!
The constant regulating outputs 0/40...20 mA of the
main board are also allocated automatically in the
software configuration as per a fixed rank order of
the terminals, in accordance with the allocation pro-
cedure for the output components.
Ranking of the outputs for automatic allocation:
1. automatic controller output free chlorine
. automatic controller output pH - value
3. automatic controller output bound chlorine
4. automatic controller output conductivity
5. Flocking pump output
In the same the clamps are assigned in a firm order.
• clips 15/16
• clips 13/14
• clips 11/1
• clips 9/10
• clips 7/8
The clip allocation is automatically displayed at the end of the
configuration (see chapter 11 also).
96
95
46
94
L
45
93
44
92
43
91 N
42
90
41
89
40
PE
88 39
87
Alarm relays