Toyota 3S-GTE Repair Manual page 39

EG-17
ENGINE — ENGINE MECHANICAL
~>. . # a Q
'll'
'v)!
__ /P185116
A - / (bl
3 Fulcru
Q' Length *-
- - .1
I
3.0 mm Hexagon Wrench _
P185211
"I Q:
{/12!... <2 fie
. a
-$
O O 'Q'
/
<a
/'
<§>"*-.r/ - _ ~v I
_-"Q &\<' , ' / ¢/Yr)? » ;-._ - (d)
'l% . /
P1855
g Q \
1''(fag
N(Q fl.\
\° \
Q
4
<0
*1
Q
_
\-
'IQ (Bl
P185116
Disconnect timing belt from camshaft timing
pulleys
Place matchmarks on the timing belt and camshaft
timing pulleys.
Turn the No.1 idler pulley bolt to obtain the specified
torque or less, and align the holes of the pulley brack-
et and cylinder head, pass a 3.0 mm hexagon wrench
through the holes to keep the setting position of the
pulley bracket.
Torque:
69 N-m (700 kgf-crn. 51 ft-lbf)
48 N-m (490 kgf-cm. 35 ft-lbf) for SST
HINT (On vehicle):
I Use SST.
SST 09249-63010
0 Use a torque wrench with a fulcrum length of
340 mm (13.39 in.).
Hold the hexagon wrench head portion of the cam-
shaft with a wrench, and loosen the intake camshaft
timing pulley bolt.
Remove the intake camshaft timing pulley bolt.
Disconnect the intake camshaft timing pulley togeth-
er with the timing belt from the camshaft, and remove
the intake camshaft timing pulley.