Dimplex GDDEU10C Instruction Manual page 6

EMPTYING WATER TANK
When dehumidifying, the water will drain into the water tank. The unit will
stop working when the water tank is full and the indicating light will illuminate
red. Follow the directions below to empty the tank.
1. Disconnect the unit from the power supply.
2. Lift off the body from the water tank.
3. Lift the water tank by the handles at the base of the tank, and pour out
the water.
4. Put the water tank back. Then place the body on the water tank.
5. Connect the power source and press the power switch to turn on the
unit.
5