Makita AF353 Instruction Manual page 7

► 1 . Trigger
Checking safety system
WARNING:
Make sure all safety systems are
in working order before operation. Failure to do so
may cause personal injuries.
CAUTION:
Make sure that the tool is not
loaded with pin nails.
► 1 . Trigger 2. Lock lever
Before pin nailing operation, check the safety system
as follows:
1.
Pull the sliding door of the magazine toward your-
self to release the anti dry fire mechanism.
2. Unload the tool.
3. Make sure that you cannot pull the trigger when
the lock lever is not pulled.
4. Make sure that you can pull the trigger after you
pull the lock lever.
If the tool fails the check above, stop using the tool and
ask authorized service center for repairing.
1
► 1 . Hook
The hook is convenient for hanging the tool temporarily.
When not in use, store the hex wrench as shown to
2
keep it from being lost.
1
► 1 . Hex wrench
7 ENGLISH
Hook
CAUTION:
Make sure that your fingers are not
placed on the trigger or lock lever and disconnect
the hose from the tool before using the hook.
CAUTION:
Never hook the tool at high loca-
tion or on potentially unstable surface.
CAUTION:
Do not hang the hook from the
waist belt. If the nailer accidentally drops, it may
result in misfiring and personal injuries.
Hex wrench storage
Air duster
CAUTION:
Do not aim the ejection port of the
air duster to someone. Also, keep your hands and
foot away from the ejection port. If the air duster
button is accidentally pushed, it may cause a per-
sonal injury.
CAUTION:
Always check your surroundings
before using the air duster. Blown dust or objects
may hit someone.
CAUTION:
Do not connect or disconnect the
air hose while pushing the air duster button.
1
1