Download Print this page

Makita AF301ZK Instruction Manual

Pneumatic brad nailer.
Hide thumbs
   

Advertisement

Pneumatic Brad Nailer
Model:AF301ZK
AF301Z
INSTRUCTION MANUAL

Advertisement

   Related Manuals for Makita AF301ZK

   Summary of Contents for Makita AF301ZK

  • Page 1

    Pneumatic Brad Nailer Model:AF301ZK AF301Z INSTRUCTION MANUAL...

  • Page 2

    AF301ZK AF301Z SPECIFICATIONS: 4-7 kg/cm² (60-100 PSI) Air pressure ¢ - ¢ ¢ ¢ ) Applicable length 10mm-30mm( Applicable width 1.25mm( ¢ ¢ Applicable thickness 1.05mm( ¢ ¢ Applicable gauge Staple capacity 100pcs. 6.0mm( Min. hose diameter ¢ ¢ 250mm ´ 55mm ´ 195mm Dimension (L ´...

  • Page 3

    SAFETY RULES DANGER:Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING:Indicates a potentially hazardous situation which, if not avoided, will result in death or serious injury. CAUTION:Indicates a potentially hazardous situation which, if not avoided, will result in minor or moderate injury.

  • Page 4

    WARNING Always disconnect the nailer from the air supply before ANY KIND of adjustment, clearance of jams, service, cleaning, re-locating and during non-operation. Always wear safety goggles with side shields and hearing protection. Employers and users are responsible for ensuring anyone near the nailer is also protected. When the nailer is being loaded or is connected to the air compressor, never place your hand or any other body part in the nail discharge area.

  • Page 5

    AIR COMPRESSOR AND CONNECTIONS NOTE:The air pressure required depends on fastener size and type of material to be nailer. Never exceed the air pressure recommended by specifications. If nails do not drive down tightly, adjust to a higher pressure setting until satisfactory. Reduce air pressure if the fasteners are being driven too deeply.

  • Page 6

    Pneumatic Brad Nailer Model: AF301ZK AF301Z...

  • Page 7

    Model: AF301ZK AF301Z Note: The specifications may differ from country to country.

This manual also for:

Af301z

Comments to this Manuals

Symbols: 0
Latest comments: