7.3 Heating mode
7.4 Performance-regulated heating mode
Start heating mode (temperature controlled)
Start heating mode with the START key.
The stove starts heating mode and switches automatically to standby mode
when the set-point temperature is reached. When the set-point temperature has
been undercut by 8.0 °C (adjustable from 55-67 °C in Start Temperature menu)
the stove automatically restarts.
Initial fill
When it is the initial operation (software update) the respective query Initial
Fill? is made before start-up.
If the OK key is pressed the auger feed is started and filled with pellets.
Change set-point temperature of flow temperature
The set-point temperature of the stove can be varied during operation using the
–/+ keys (65 - 75 °C).
Stop heating mode
Press the Stop key to discontinue the heating operation.
Turn off the pellet stove
To prevent accidental or unintentional switching off, the safety query appears:
Switch off?
Confirm with OK.
The stove must then be restarted when required.
Activate operating mode "Performance-Regulated"
•
Select item Mode from the menu
•
Select manual–performance
•
Confirm with OK
Change performance
The heating performance can be varied during operation using the -/+ keys
(30-100 %).
The heating mode can be stopped with the Stop key.
14