Download Print this page

Manufacturer's Fcc Declaration Of Conformity; Safety Compliance Notice - U4EA Fusion 70 Installation Manual

Hide thumbs

Advertisement

Table of Contents
This device has been designed to operate with an antenna having a maximum gain of 3 dBi. Antenna
having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna
impedance is 50 ohms
Only the antennas listed below are allowed to be used with the radio.
Ant
Antenna Type
1
Monopole Ant.
2
PCB Ant.

Manufacturer's FCC Declaration of Conformity

Model Number: Fusion 70
U4EA Technologies, Inc
Fremont, CA
January 7, 2009
Equipment Type: WLAN Access Point
Complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Safety Compliance Notice

This device has been tested and certified according to the following safety standards and is intended
for use only in Information Technology Equipment which has been tested to these or other equivalent
standards:
EN60950-1
IEC 60950-1
UL 60950-1
Model Name
description
TWX-
2dBi Dual-Band
145XRSXX-361
Omni Antenna
TFF-
Integrated PCB
A015MPAX-361
Antenna
Product
2.4 GHz Gain
(dBi)
2
3
Tx/Rx mode
Remark
Main Ant. for
2T3R
test
Main Ant. for
2T3R
test

Advertisement

Table of Contents
loading

  Related Content for U4EA Fusion 70