If You Lose Your W52H - Hitachi w52h User Manual

If you lose your W52H

Configuring "Lock by Incoming" settings for Remote Ctrl Lock makes it
possible to perform a remote operation that activates Auto Lock and
FeliCa lock to lock the W52H. This helps to avoid unauthorized use of
your phone and its features.
■ Configuring Operating Environment Settings for Lock by
Incoming
Repeatedly calling the W52H from a pre-registered telephone number a specified
number of times within a specified amount of time will activate Auto Lock and
FeliCa Lock.
While the standby screen is displayed,
press c413, input the lock No.,
and then press c (OK).
Press 3 (Lock by Incoming) and then
press 4 (Caller ID List).
Use j to select a registration number,
press % (Edit), input the phone number,
and then press c (Reg).
You can also press & (Menu) before inputting a phone number, and select the
number from the address book, outgoing records, or incoming records, or you
can specify a pay phone. You can register up to three different phone numbers.
Press C twice and advance to the next step.
Press 1 (ON/OFF Setup), and then
press 1 (ON).
Press 2 (Specified Time), input the
period you want to specify, and then
press c (OK).
You can set the time period (the time intervals from the first
call to the last call you should make to activate Remote Ctrl Lock).
You can set the time period between 1 to 10 minutes.
98