NETGEAR Nighthawk AC1900 D7000v2 User Manual page 44

Wifi vdsl/adsl modem router
Hide thumbs Also See for Nighthawk AC1900 D7000v2:
Table of Contents

Advertisement

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2
Note
For some ISPs, you can select the IPTV virtual interface from the menu above the
Enable This Interface check box. If you are specifying the settings for the IPTV virtual
interface, select IPTV from the menu. However, first specify the settings for the Internet
virtual interface (which is the default interface) before you specify the settings for the
IPTV virtual interface.
9.
Scroll down to the Does your Internet connection require a login? section and select the No radio button.
The page adjusts.
10.
Enter the VDSL settings as described in the following table.
Field
Multiplexing Method
VPI
VCI
Use VLANID
Priority (0 ~ 7)
Account Name
Domain Name
Internet IP Address
Get Dynamically from ISP
Use Static IP Address
Use IP over ATM (IPoA)
Domain Name Server (DNS) Address
The DNS server is used to look up site addresses based on their domain names.
Description
These settings are disabled because they do not apply to a VDSL connection.
Select the Use VLANID check box and enter the VLAN ID, as indicated by
your ISP.
A VLAN ID might be required if you subscribe to both Internet service and a
service such as IPTV. If your ISP did not provide you with a VLAN ID, leave
the Use VLANID check box cleared, which is the default setting.
If your ISP provided you with a VLAN ID and a priority value, enter the priority
value, which is a number from 0 to 7.
You can enter a priority value only in combination with a VLAN ID. If your
ISP did not provide you with a priority value, leave the default setting (0).
Enter the account name, as indicated by your ISP. This name might also be
called the host name.
If your ISP did not provide you with an account name or host name, leave
the default setting.
Enter the domain name, as indicated by your ISP.
If your ISP did not provide you with a domain name, leave this field blank.
Your ISP uses DHCP to assign your IP address. Your ISP automatically
assigns these addresses.
Enter the IP address, IP subnet mask, and gateway IP address that your ISP
assigned you for static IP address service. The gateway is the ISP router to
which your modem router connects.
Enter the IP address, IP subnet mask, and gateway IP address that your ISP
assigned you for IPoA service. The gateway is the ISP router to which your
modem router connects.
Manage the Internet Settings Manually
44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents