NETGEAR Nighthawk AC1900 D7000v2 User Manual page 13

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2
Table 2. LED and button descriptions
LED Description
Power
• Solid amber. The modem router is starting.
If the Power LED lights solid amber during any other time, a power-on self-test (POST)
failure or device malfunction occurred.
For more information, see
• Blinking amber. The modem router was reset to factory default settings and is restarting.
For more information, see
• Solid white. The modem router is ready.
• Off. Power is not supplied to the modem router.
For more information, see
Internet
• Solid white. The modem router detected an Internet connection.
• Solid amber. The modem router is not connected to a DSL, cable, or fiber modem, or the
modem router did not detect an Internet connection.
For more information, see
• Blinking white. Data is being transmitted over the Internet connection.
• Alternating white and amber. The traffic meter is enabled and the traffic limit is reached.
• Off. The modem router cannot connect to the Internet or the Internet connection failed.
For more information, see
DSL
• Solid white. The modem router is connected to a DSL service and the DSL connection is
ready.
• Blinking white. The modem router is negotiating the best possible speed on the DSL line.
• Off.The modem router is not connected to a DSL service or a DSL connection is not
established.
2.4 GHz WiFi
• Solid white. The 2.4 GHz WiFi radio is operating.
• Blinking white. The modem router is sending or receiving WiFi traffic over the 2.4 GHz
radio.
• Off. The 2.4 GHz WiFi radio is off.
5 GHz WiFi
• Solid white. The 5 GHz WiFi radio is operating.
• Blinking white. The modem router is sending or receiving WiFi traffic over the 5 GHz radio.
• Off. The 5 GHz WiFi radio is off.
Power LED Remains Solid Amber
Use the Reset Button
Power LED Is Off
Troubleshoot the Internet Connection
Internet LED Is Off
Hardware Overview of the Modem Router
13
on page 202.
on page 159.
on page 201.
on page 203.
on page 204.