Fitting the condensate cup
Slide the condensate
cup into position at the
reverse of the pressure
cooker as shown (figs. 1)
Removing and fitting the lid
To remove the lid (figs. 2) - hold the lid by the handle and turn the lid
anticlockwise until the alignment mark () on the rim of the
pressure cooker housing is aligned with the 'unlocked' padlock
symbol on the lid. Lift off the lid.
To fit the lid (figs. 3)- Position the lid above the pressure cooker and
align the 'unlocked' padlock symbol on the lid with the alignment
mark () on the rim of the pressure cooker housing. Turn the lid
clockwise until the 'locked' padlock symbol is aligned with the
alignment mark ().
ISSUE-1 2/8/2017
Figs. 2
Figs. 3
7
Figs. 1