Using The Delay Start Function; Cleaning - Cookworks MY-CS6007WP Care & Instruction Manual

Using the delay start function

1. Follow the usual directions outlined above for assembling and
setting the pressure cooker but DO NOT press the START button.
2. Press the DELAY button and the display will show a default delay
time of 2 hours.
3. Adjust the delay interval (10 seconds or 1 - 24hours) using the
+ /- buttons and now press the START button to complete the
program. Three bleeps will be heard, the cook indicator will stop
flashing and all buttons except the cancel button will be
inoperative.
4. The display will count down to show the length of time remaining
before the pressure cooker will start to operate.
5. When the display reaches zero, the pressure cooker will start to
operate and the display will now show the cooking time
remaining.
6. When the display reaches zero, the pressure cooker will switch to
warming mode as indicated under manual operation.
Note:
Please note that the delay start function is not available for slow

cooking, searing and keep warm mode.

Cleaning

1. Clean all parts before first use and after each use.
2. Switch off, unplug and allow the pressure cooker to cool fully.
3. Remove the condensate collector, seal, exhaust valve, exhaust
value cover, float valve gasket and float valve and wash
separately.
4. The lid, removable bowl, utensils and the removable parts listed
above may be washed in hot water with a little washing up liquid.
Rinse and wipe dry. Not suitable for use in dishwashers.
5. Wipe the surfaces of the pressure cooker housing with a damp
cloth; do not use detergent or abrasives as these may scratch the
surface.
water.
6. Refit all parts after washing.
ISSUE-1 2/8/2017
Never immerse the motor housing, cable or plug in
17