Intel WPC2011BWW Quick Installation Manual page 6

Installation Steps
Step 2: Attach the Regulatory Compliance Label
A sheet of peel and stick regulatory compliance labels is
shipped with the adapter. Follow the directions on the sheet and
affix the appropriate label to the adapter.
Step 3: Install the Hardware
Before You Start
If the hardware is already installed, go to step 4.
Notebook Requirements
Installing the Intel® PRO/Wireless 2011B LAN Adapter in a
notebook computer requires the following minimum
configuration:
• 233 MHz Pentium II
• 64 MB RAM
• A CD-ROM drive
• A video card capable of 256 colors
• One of the following operating systems: Microsoft
Windows† 95C, Windows 98, Windows 98 SE, Windows
ME or Windows 2000.
If you are unfamiliar with these terms, check with your
network administrator to make sure that your computer meets
these minimum requirements.
If the installation fails, the following information may be
useful to a network administrator. You do not have to be
familiar with these terms to continue with the installation.
However, if you encounter a problem during the installation,
present this information to your network administrator.
• A Type II PC card slot
• An available interrupt request line (IRQ)
• An available input/output (I/O) port address
If You Are Running Microsoft Windows 95, Windows 98,
or Windows 2000
Installation and removal methods vary for different notebook
computers. Refer to your owner's manual for specific
instructions.
2 Intel® PRO/Wireless 2011B LAN Adapter Quick Installation Guide