Intel WPC2011BWW Quick Installation Manual page 14

Installation Steps
see here are the same tabs in the Network Control Panel
Applet (NCPA).
9. When you finish making changes, click
application.
10. Insert the adapter and reset the Windows CE device. On
some devices, you are not prompted to reset the device.
However, for the adapter to function properly, you must
reset the device.
Step 5: Install Intel® PRO/Wireless LAN Software
Before You Start
You launch the software installation from the Intel CD. If you
do not have an Intel CD, go to the Intel support website at
http://support.intel.com
package.
Instructions for Windows XP
You can manage adapters through either Intel PROSet II or
Windows XP.
If you decide to manage your adapters through Windows XP,
do not install the Intel PRO/Wireless LAN Software and do the
following.
1. Left-click the Windows XP Network icon in the System
Tray. This is typically in the lower right corner of your
computer screen.
2. Click the
3. Click the
4. Make sure that the
wireless network settings
If you decide to manage your adapters through Intel PROSet II,
do the following.
1. Left-click the Windows XP Network icon in the System
Tray. This is typically in the lower right corner of your
computer screen.
2. Click the
3. Click the
10 Intel® PRO/Wireless 2011B LAN Adapter Quick Installation Guide
and download the software
Properties button.
Wireless Network tab.
Use Windows to configure my
checkbox is checked.
button.
Properties
tab.
Wireless Network
OK to close the