HP H8/3003 User Manual page 37

002000..00200f 54 48 49 53 20 49 53 20 4d 45 53 53 41 47 45 20
002010..00201f 41 54 48 49 53 20 49 53 20 4d 45 53 53 41 47 45
002020..00202f 20 42 49 4e 56 41 4c 49 44 20 43 4f 4d 4d 41 4e
002030..002030 44
communication with the host; you then enter the transfer
command to start the HP 64000 transfer utility. Typing
"<ESC>*" tells the system to return to the emulator after
transferring the code. The "##" marks returned by the system
indicates that the emulator loaded two records from the host.
3. At this point you should examine a portion of memory to
verify that your code was loaded correctly.
Type:
R> m 2000..2030
You should see:
If your system does not match, verify 1) that you entered the
source code correctly; 2) that you entered the linker
parameters correctly.
Getting Started 2-17