Initialize The Emulator To A Known State - HP H8/3003 User Manual

load - download absolute file into processor memory space
load -i
load -m
load -t
load -S
load -h
load -a
load -e
load -u
load -o
load -s <str>
load -b
load -x
load -q
load -p
load -c <file>
Initialize the
Emulator to a
Known State
Note
2-8 Getting Started
- download intel hex format
- download motorola S-record format
- download extended tek hex format
- download sysmbol file
- download hp format (requires transfer protocol)
- reserved for internal hp use
- write only to emulation memory
- write only to target memory
- data received from the non-command source port
- send a character string out the other port
- data sent in binary (valid with -h option)
- data sent in hex ascii (valid with -h option)
- quiet mode
- record ACK/NAK protocol (valid with -imt options)
- data is received from the 64000. file name format is:
<filename>:<userid>:absolute
To initialize the emulator to a known state for this tutorial:
It is especially important that you perform the following step if the
emulator is being operated in a standalone mode controlled by only a
data terminal. The only program entry available in this mode is
through memory modification; consequently, if the emulator is
reinitialized, emulation memory will be cleared and a great deal of
tedious work could be lost.
1. Verify that no one else is using the emulator or will have need
of configuration items programmed into the emulator.
2. Initialize the emulator by typing the command:
R> init