Installation; Mounting The Fusion 50 Access Point - U4EA Fusion 50 Quick Start Manual
Hide thumbsAdvertisement
Table of Contents
Installation
Installation
Prerequisites
The following are the prerequisites that you need to adhere to
before attempting to install the Fusion 50 access point:
For ease of cable connections, ensure that the access point is
near a hub or computer, as well as a reliable power source.
Ensure that the access point is away from any equipment that
might cause radio signal interference, such as, transformers,
heavy-duty motors, fluorescent lights, microwave ovens,
refrigerators, or other.
Note:
Do not place the
Mounting the Fusion 50 Access Point
Do the following to mount an access point:
1.
Find a solid mounting point on the wall, such as a stud or
main building member. You may need to use a stud finder to
find a solid wooden structure.
P/N: 001287, Rev. 1
Fusion 50
on any type of metal surface.
BETA
3
Advertisement
Table of Contents
