U4EA Fusion 50 Quick Start Manual page 10

Configuration
Check the Activate these APs using the template
3.
radio button.
Click Activate.
4.
The system will now use the AP template that you created in
"Creating an AP Template" on page 6 to activate the selected
APs.
You can verify that all APs were activated by waiting a
5.
minute and then going to Wireless LAN> Controller >
Configuration > Access Points > Activated APs tab. The
activated APs should now appear.
Note:
If this is the first time that you activated an AP, then the
software on the AP upgrades automatically. The AP is
unreachable for about a minute while the software
upgrades.
Finally, save the configuration by clicking Save
6.
Configuration located on top of the user interface.
10 BETA P/N: 001287, Rev. 1