3D L/R Invert
3D Warning Message
Note 1: It needs correct settings on graphic card 3D application program for
correct 3D display.
Note 2: The SW players, such as Stereoscopic Player and DDD TriDef Media
Player can support 3D format files. You can download these three players
on web page below,
- Stereoscopic Player (Trial):
- DDD TriDef Media Player (Trial):
Note 3: "3D L/R Invert" is only available when 3D is enabled.
Note 4: There has reminder screen if 3D still enable when power on projector.
Please adjust setting depended on your purpose.
Note 5: WUXGA model 24P 3D cannot be scaling due to TI ASIC buffer
memory limitation, and once detect 24P 3D (96Hz or 144Hz) inputs, Aspect
Ratio / HDMI Scan Info will be gray out, also HIDE will be not supported.
Choose "On" to enable DLP 3D function.
On: Choose this item while using DLP 3D glasses, 120Hz 3D
capable graphics cards and HQFS format file or DVD with
corresponding SW player.
Off: Turn off 3D mode.
If the 3D content is not displayed correctly, you can select a 3D
format that suits the 3D content you are viewing and obtain the
Choose "96Hz" or "144Hz" to compatible with 3D glasses.
If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute "Invert" to get best match of
left/right image sequence to get the correct image (for DLP 3D).
Choose "On" to display the 3D warning message.
Choose the multilingual OSD menu. Use the
key to select your preferred menu language.
Press "ENTER" to confirm the selection.