Table of Contents
Advertisement
The soundbar
does not emit
any sound in TV
mode or play-
back stutters.
Music playback
skips or is inter-
rupted.
I would like
to reset the
Soundbar.
195479_GB_20170619.indd 15
If you are operating the soundbar with a TV via the digital
output (HDMI ARC or OPT), you have to set the output mode
to "PCM" in the TV settings for the selected TV output.
You can find more information in our online documentation:
http://manual.teufelaudio.com/soundbar.
It is possible that one or more Teufel device(s) do not have a
Wi-Fi signal or it is too weak.
Place the devices closer to the router, try alternative setup
locations or connect devices, which are set up far away, with
an Ethernet cable.
As a test, refrain from using repeaters. If applicable, use an
audio stream with low resolution.
Also visit the website of the router manufacturer for tips on
how to improve your Wi-Fi.
You can find more information in our online documentation:
http://manual.teufelaudio.com.
Notice: By resetting the device, all system configuration
settings will also be reset.
Resetting the device: When the device is switched on, use
a paper clip that has been bent straight to push the reset
button (18) and hold it down until the device restarts (for at
least 8 seconds).
• Soundbar
15
20.06.17 09:44
Advertisement
Table of Contents
