Declaration Of Conformity ....13 Connection Examples ....... 7 General Notes and Information Proper use Safety notes The Sounddeck is designed for the The enclosed brochure “Impor- playback of music and speech trans- tant product information” contains mitted via cable from an external general safety notes which you player or via Wi-Fi.
Unpacking Package contents (1) Sounddeck (2) Wireless remote control (3) Mains cord (4) HDMI cable (5) Brochure “Important product information” • Check that all items have been delivered and that nothing is damaged. If you find any damage, do not operate the device; instead contact our customer service department (see back side).
Page 4
TV set without an ARC (7) Reset button: hold for 8 seconds function * while the device is on to reset the Sounddeck to the factory (13) Main power switch default settings. (14) Mains connector jack for the (8) Audio input for a TV set via mains cord.
Page 5
(22) Select an input: OPTICAL (11) (25) (23) Select an input: HDMI ARC (8) (24) Next/previous track (only in streaming mode) (25) Increase/decrease the volume (26) Select an input: Streaming (27) Select an input: AUX IN(12) • Sounddeck 195480_GB_20170619.indd 5 20.06.17 12:52...
Internet connection. adequate Wi-Fi signal throughout your home. Setup • The perfect spot for the Sounddeck is in a central position under the Please note that obstacles such as walls and ceilings may affect signal transmission.
TV set does not support Recommended “ARC”. connection if the TV set supports “ARC”. “CEC” must be enabled on the TV set. Sounddeck You can find further tips and infos here: http://manual.teufelaudio.com/ sounddeck • Sounddeck 195480_GB_20170619.indd 7 20.06.17 12:52...
IN THE APPLE APP STORE Wi-Fi. • Have the Wi-Fi password for your router ready. • Load the TEUFEL RAUMFELD APP from the Play Store/App Store. TEUFEL RAUMFELD APP IN THE GOOGLE PLAY STORE • Once you have started the app, the setup wizard will guide you through the setup process.
Wireless Remote Control The remote control must be connected to the Sounddeck during initial installation. 1. Pull out the plastic strip on the bottom of the remote control. 2. Now hold the remote control in a central position directly in front of the Sounddeck.
Sounddeck creating a button. very broad spatial playback effects. Programming preset buttons With audio playback (via ARC, 1. Make sure that the Sounddeck is OPTICAL or AUX), you can conven- operational. iently configure the desired sound pattern with the remote control 2.
You can find more information in our online documentation: http://manual.teufelaudio.com. The Sounddeck If you are operating the Sounddeck with a TV via the digital does not emit output (HDMI ARC or OPTICAL), you have to set the output any sound in TV mode to “PCM”...
Page 12
Music playback It is possible that one or more Teufel device(s) do not have a skips or is inter- Wi-Fi signal or it is too weak. rupted. Place the devices closer to the router, try alternative setup locations or connect devices, which are set up far away, with an Ethernet cable.
Declaration Of Conformity Lautsprecher Teufel GmbH hereby declares that this product complies with the requirements of the directives 2014/30/EU, 2014/35/EU and 2014/53/EU to the extent they are installed and used in accord- ance with the instructions of the manufacturer. The full text of the EU declaration of conformity is available at the following Internet address: www.teufelaudio.com/konformitaetserklaerungen.html...