Maintaining And Transporting The Projector; Projector Maintenance; Cleaning The Projection Window - Epson BrightLink Pro 1470Ui User Manual

Maintaining and Transporting the Projector

Follow the instructions in these sections to maintain your projector and transport it from place to place.

Projector Maintenance

Air Filter and Vent Maintenance
Replacing the Remote Control Batteries
Replacing the Hard Pen Tips
Replacing the Soft Pen Tips
Transporting the Projector
Projector Maintenance
Your projector needs little maintenance to keep working at its best.
You may need to clean the projection window and obstacle sensor periodically, and clean the air filter
and air vents to prevent the projector from overheating due to blocked ventilation.
The only parts you should replace are the air filter, pen batteries and tips, control pad batteries, and
remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson
servicer.
This projector uses a sealed laser light source which does not need servicing and cannot be replaced.
Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open
any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages
in the projector can injure you severely.
Warning: Do not try to service this product yourself, except as specifically explained in this manual.
Refer all other servicing to qualified servicers.

Cleaning the Projection Window

Cleaning the Obstacle Sensor
Cleaning the Projector Case
Parent topic:
Cleaning the Projection Window
Clean the projection window periodically, or whenever you notice dust or smudges on the surface.
Maintaining and Transporting the Projector
311