Note: Once you save a user pattern, you cannot restore the default pattern.
1. Display the image you want to project as the User Pattern from a connected computer or video
source.
2. Press the Menu button, select the Settings menu, and press Enter.
3. Select the Pattern setting and press Enter.
4. Select the User Pattern setting and press Enter.
You see a prompt asking if you want to use the displayed image as a User Pattern.
Note: When you select User Pattern, adjustments such as Keystone, E-Zoom, Aspect, Adjust
Zoom, or Image Shift are temporarily canceled.
5. Select Yes and press Enter.
Note: It takes a few moments for the projector to save the image; do not use the projector, its remote
control, or any connected equipment until it is finished.
You see a completion message.
6. Press Esc to exit the message screen.
Parent topic:
Adjusting Projector Features
176