Epson BrightLink Pro 1470Ui User Manual page 242

• Search Base DN lets you enter the DN (Distinguished Name) where the search for user names
and email addresses should start. You can enter up to 63 alphanumeric characters. Do not use a
colon (":") or spaces. This field is case-sensitive.
Note: Make sure you specify the OU (Organizational Unit) and DC (Domain Component) as
necessary, with OU first in this format: OU=accounts,DC=example,DC=com. The DN must be at
or below the DC level in the database structure.
• Search Target Attributes lets you enter the search attributes for user name, email address, and
user group name. You can enter up to 63 alphanumeric characters. Do not use a colon (":") or
spaces. This field is case-sensitive.
• User Attributes lets you enter a user name. You can enter up to 63 alphanumeric characters. Do
not use a colon (":") or spaces. This field is case-sensitive.
• Mail Attributes lets you enter the attribute for the mail address. You can enter up to 63
alphanumeric characters. Do not use a colon (":") or spaces. This field is case-sensitive.
• Group Attributes lets you enter the attribute for the user group name. You can enter up to 63
alphanumeric characters. Do not use a colon (":") or spaces. This field is case-sensitive.
• Additional Filter lets you enter an additional filter to Search Target Attributes. You can enter up to
63 alphanumeric characters. Do not use a colon (":") or spaces. This field is case-sensitive.
• LDAP Server let you enter the IP address or host name for the LDAP server. You can enter up to
63 alphanumeric characters. Do not use spaces or the following symbols: " ' + , : ; < = > ? [ \ ] ` |. If
you specify a host name, you must configure a DNS server.
Note: You cannot use the following IP addresses: 127.x.x.x, 192.0.2.x, or 224.0.0.0 to
255.255.255.255.
• Port Number lets you enter a port number for the LDAP server. The default port is 389.
• Authentication lets you set the type of authentication expected by the LDAP server. If you are
using Digest-MD5 or simple authentication and the LDAP Server setting is set to an IP address,
you must enable reverse DNS lookup on the DNS server.
• User name lets you enter a user name for the mail server. You can enter up to 64 alphanumeric
characters. Do not use a colon (":") or spaces.
• Password lets you enter a password for the mail server. You can enter up to 64 alphanumeric
characters. Do not use a colon (":") or spaces.
242