Section 2. Assembling & Folding Your Swagcycle™ Envy - SWAGTRON SwagCycle Envy User Manual

Section 2. Assembling & Folding your SwagCycle™ Envy
6
ENGLISH
Silver bolt
NOTE:
between the latch and the stem. Doing so
may result in injury.
TO UNFOLD (fig. 1 & 2):
Step 1. Pull the handlebar stem upright.
Step 2. Fold the latch up to close it. It will
snap into place.
TO FOLD (fig. 3 & 4):
Step 1. Locate the silver bolt in the side of
the latch and pull it up.
Step 2. While holding the bolt up, use your
other hand to unfold the latch by
pulling it down away from the stem.
There is a notch on the other side of
the latch to make this easier.
Step 3. With the latch undone, fold the stem
down.
SWAGTRON SwagCycle Envy Folding Electric Scooter