Section 5. Display Screen Settings; Measurement Settings - SWAGTRON SwagCycle Envy User Manual

Section 5. Display Screen Settings

5.1 Measurement Settings

mph
• Settings can be changed by pressing the Menu Button. Pressing this button will switch the on-screen
speed measurement from (miles) to km (kilometers). The cycle is set to display is mph (miles per hour)
by default.
Switching distance measurement will also switch speed measurement i.e. if distance is set to mph,
speed will be measured in mph and/or if distance is set to km/h, speed will be measured in km/h.
SWAGTRON SwagCycle Envy Folding Electric Scooter
Menu Button: After you powering on your cycle, press Menu
button to cycle between ODO, ERR, and TRIP on-screen.
Menu Button
Power Button: Press to power on the cycle and the automatic
headlight.
Power Button
km/h
• With the cycle off, press and hold the Menu Button then
press and hold the Power Button. Continue to hold
both buttons for approximately two seconds. The cycle
should turn on and enter the Measurement Settings
menu.
• After entering the Measurement settings screen, press
and hold the Menu button until the Number 0001or
13
ENGLISH