Using The Lanyard - Williams Sound PKT 2.0 User Manual

To use the neckloop: Place the neckloop around your neck as
shown below. While holding the housing with one hand, pull up on
the cord lock bead with the other hand to tighten for comfort. Plug
the neckloop into the headphone jack on the Pocketalker. Turn on
the T-coil in the hearing aid(s). Turn on the Pocketalker and adjust
the volume to a comfortable listening level.
Using a Neckloop

Using the Lanyard

The supplied Pocketalker Lanyard (RCS 003) provides a convenient
Note:
way of transporting the Pocketalker from place to place; it protects your
investment from accidental dropping, and provides quick and easy access
The RCS 003 Lanyard has a safety
for operation whenever it is needed.
breakaway feature that disconnects
WARNING!
when too much pressure is applied
to the lanyard.
used if there is a risk of getting it lodged or stuck in machinery or other objects.
The NKL 001 neckloop has a safety breakaway feature
that disconnects when too much tension is applied to
the neckloop.
Cord Lock "Bead" Pull up to tighten
Neckloop "Housing" Hold down while tightening
To prevent strangulation, the lanyard should not be
17