List Current Sensors; List Failed Drives - Dell PowerVault MD3060e Administrator's Manual

Parameter
-outputformat
Command examples
•
list voltage sensors -a = 1 -enc = 500a123456789012
•
list voltage sensors -a = 1 -enc = 0
•
list voltage sensors -enc = 500a123456789012 -outputformat = xml

List current sensors

Description
Lists the current sensors accessible from the specified enclosure.
Command syntax
secli (list current sensors | listcurrentsensors | lcs) (-a=<(SAS WWID|
AdapterIndex)> -enc=<(WWN | EnclIndex)> [-
outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-
outputformat=<SupportedOutputFormats>] | [-h])
Parameters
Table 17. List current sensors
Parameter
-h, -help
-outputformat
-a, -adapter
-enc
Command examples
•
list current sensors -a = 1 -enc = 500a123456789012
•
list current sensors -a = 1 -enc = 0
•
list current sensors -enc = 500a123456789012 -outputformat = xml

List failed drives

Description
Lists the drives that have been predicted to fail and/or drives which have returned errors through system
calls. The output describes the call attempted and the SCSI error codes returned.
Description
You can specify the following output formats: xml
or json.
Description
Provides more information about the command,
description, and usage.
You can specify the following output formats: xml
or json.
Specify the adapter used for the command. This is
either SAS WWID or the AdapterIndex.
Specify the enclosure is used for the command.
This is either WWN or the EnclosureIndex.
29