List Temperature Sensors - Dell PowerVault MD3060e Administrator's Manual

Syntax
secli (list power supplies | listpowersupplies | lps) (-a=<(SASAddress |
AdapterIndex)> -enc=<(WWN | EnclIndex)> | -enc=<WWN> | [-h])
Parameters
Where:
-a
-enc
-h
Output

List Temperature Sensors

Description
This command lists the Temperature Sensors accessible from the specified enclosure.
Syntax
secli (list temp sensors | listtemperaturesensors | lts) (-a=<(SASAddress |
AdapterIndex)> -enc=<(WWN | EnclIndex)> | -enc=<WWN> | [-h])
Parameters
Where:
-a
-enc
-h
Specify the Adapter to be used for the command.
This can be either SASAddress or AdapterIndex.
Specify the Enclosure to be used for the
command. This can be either WWN or EnclIndex.
Provides additional information about the
command, description and usage.
Specify the Adapter to be used for the command. This can be
either SASAddress or AdapterIndex.
Specify the Enclosure to be used for the command. This can be
either WWN or EnclIndex.
Provides additional information about the command,
description and usage.
25