Update Emm Firmware - Dell PowerVault MD3060e Administrator's Manual

A summary of the update process is displayed to you after the command completes running.
NOTE: When attempting to update multiple drives, the specified firmware file is used on all drives
within the scope of the command. Drives compatible with the firmware file are updated while
incompatible drives fail gracefully.
NOTE: If the firmware file path contains spaces, enclose the filepath in double quotation marks ("").
For example, –file="C:\My Files\my firmware.fwh"
NOTE: Only firmware files with the.fwh extension are supported for updating drives by using the
secli.

Update EMM firmware

1. Download the latest firmware package from Dell.com/dsmsmanuals.
2. Stop all I/O between the server and the attached enclosures containing the EMMs you want to
update.
NOTE: After this update process begins, you may lose access to the drives or enclosure
connected to the update target. The EMM does not respond to commands again until it is
correctly updated and ready for use.
3. Run the following command:
secli update emm -a=<(SASAddress | AdapterIndex)>-enc=<(WWN | EnclIndex)>-
emm= <(WWN | EMMIndex)> -file= <FW.FilePath>
NOTE: The progress of the firmware transfer is indicated in the console.
4. The EMM updates the firmware and reboots.
NOTE: This process may take up to five minutes.
19