List Fans - Dell PowerVault MD3060e Administrator's Manual

Command syntax
secli (list drive slots | listdriveslots | lds) (-a=<(SAS WWID | AdapterIndex)>
-enc=<(WWN | EnclIndex)> [-outputformat=<SupportedOutputFormats>] [-verbose] | -
enc=<WWN> [-outputformat=<SupportedOutputFormats>] [-verbose] | [-h])
Parameters
Table 12. List hard disk drive slots
Parameter
-a
-enc
-h
-outputformat
Command examples
•
list drive slots -a = 1 -enc = 500a123456789012
•
list drive slots -a = 1 -enc = 0
•
list drive slots -enc = 500a123456789012 -outputformat = xml
•
list drive slots -a = 1 -enc = 500a123456789012 -verbose

List fans

Description
This command lists the fans accessible from the specified enclosure.
Command syntax
secli (list fans | listfans | lf) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN |
EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-
outputformat=<SupportedOutputFormats>] | [-h])
Parameters
Table 13. List fans
Parameter
-a
-enc
26
Description
Specify the adapter used for the command. This
can be either SAS WWID or AdapterIndex.
Specify the enclosure used for the command. This
is either WWN or EnclIndex.
Provides more information about the command,
description, and usage.
You can specify the following output formats: xml
or json.
Description
Specify the adapter used for the command. This
can be either SAS WWID or AdapterIndex.
Specify the enclosure used for the command. This
can be either WWN or EnclIndex.