Adjusting Focus - Philips NetCam DVR Installation Instructions Manual

DVR_NC_ii_98911_0047.qxd
NetCam DVR
4

ADJUSTING FOCUS

Screws
1 First, adjust focus of the NetCam DVR by turning the front focus ring of
the lens.
2 If you cannot focus with the lens, loosen the three screws in the rear focus
ring.
3 Setting the lens at the middle range, focus by turning the rear focus ring.
4 When you have focused, tighten the three screws.
5 Complete the focus by turning the front focus ring of the lens.
12/13/00 1:53 PM Page 33
Section 4
33