Philips NetCam DVR Installation Instructions Manual page 19

DVR_NC_ii_98911_0047.qxd
NetCam DVR
Using ARP in Windows 95
Start a DOS window and type the following commands.
I
arp -s <NetCam DVR IP add.> <NetCam DVR Ethernet add.> <my PC IP
add.>
ping <NetCam DVR IP address>
Example
I
arp -s 200.243.232.178 00-40-8c-10-00-86 200.243.232.130
ping 200.243.232.178
Verifying installation
If the procedures are installed successfully, the following message or similar will
be displayed:
Request timed out
:
Request timed out
Reply from 200.243.232.178: bytes=32 time=2ms TTL=255
Reply from 200.243.232.178: bytes=32 time=2ms TTL=255
Ping statistics for 200.243.232.178:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milliseconds:
Minimum = 1ms, Maximum = 2ms, Average = 1ms
If you cannot receive the reply by the 'ping' command, try pressing 'F3' and
I
'Enter' keys again. Normally 'Request timed out' messages appear 7 times
before you receive a proper reply.
If you succeed in utilizing the above commands, you will receive a reply
I
continuously. You can stop the process by pressing <Ctrl>+<C> keys.
12/13/00 1:53 PM Page 19
Section 2
19