Philips NetCam DVR Installation Instructions Manual page 26

DVR_NC_ii_98911_0047.qxd
NetCam DVR
- Password: You can change the
password. Key in the old password,
then the new password twice. It is
very hard to repair the password if
you do not remember it. The only
way to repair, is to initialize with
special software developed by Philips.
However, this is not provided to end
users.
- Screen Adj.: You can adjust the screen
display for brightness, contrast, hue,
saturation, horizontal offset, and
vertical offset. Adjustments affect the
live image screen and the recorded
image screen. However, the recorded
screens are not affected directly. You
can see the change when you replay
the images that are recorded after the
initial live image adjustment.
Backup:
This allows you to backup the recorded images from the NetCam
DVR to your PC remotely via the network. There are two
methods for backing up, 'Copy/Paste' and 'Cut/Paste'. If you click on
'Cut/Paste' button, you can only back up from the first frame that is recorded on
HDD.
There are two ways to define the data period for backup.
You can select a percentage of 20, 30, 50 and 100% of total data.
I
You can define the date/time period for data deletion.
I
26
12/13/00 1:53 PM Page 26
Section 3