FCC ID: 2AD29B29 USER GUIDE WELCOME Thank you for purchasing ! This Bluetooth Earphone is a unique wireless headphone combining Bluetooth, Lithium Polymer Battery technologies. It is designed to provide you with wireless high quality sound for your Bluetooth audio devices.
HIGH-FIDELITY SOUND & BLUETOOTH 4.1 TECHNOLOGY The Earphone boasts state-of-the-art Bluetooth® 4.1 APTX® audio enhancement technology, specifically designed for optimal wireless transmission and enhanced audio signals. This advanced technology, combined with premium audio components, delivers gratifying, high-quality audio. Optimized to consume less power wirelessly without comprising performance, this version of Bluetooth is both practical and accessible.
HOW TO WEAR YOUR DEVICE EAR TIPS We have included 3 sets of ear tips. Depending on the size and shape of your ear canal, use the one that fits you best. To replace the ear tips, simply remove them to replace.
CORD MANAGEMENT CLIP The earbuds have a cord management clip installed to secure the slack for a customized fit Place the cord with the clip as shown below.
CHARGING Before using, please charge it using the micro USB charging cable included in the package. Note Most USB chargers are compatible with it. For optimal AC charging, please use a 1.0A USB charger. Gently lift the USB charging port cover , plug the small micro USB into the charging port on the right side of the earbuds and the other end of the cable (the standard USB 2.0 plug) into any standard USB port (such as a computer or USB charger).
PAIRING 1 Press and hold the power button on the wire of earbuds for 5 seconds to put the earbuds into pairing mode. You will hear the voice prompt "Pairing" and the LED light on the remote will flash blue/red. Note.
OPERATION INSTRUCTION POWER ON Press the power button for 3 seconds. (LED flashes slowly.) Voice prompt: "Power on" POWER OFF Press the power button for 3 seconds. LED will turn off. Voice prompt: "Power off"...
ANSWER CALL Press the power button once while a call is incoming. END CALL Press the power button once to end call. REDIAL Double press the power button to redial the last number.
SPECIFICATION Earphones parameters Audio profiles; HFP, HSR A2DP and APTX Talk/music time: About 7h (Standby time: About 300h) Battery type: Rechargeable lithium polymer battery Bluetooth parameters Effective distance 33ft./10m Version 4.1 Frequency response: 20 - 20.000KHz 6C CVC noise reduction NOTES Do not expose the built-in battery to excessive heat including direct sunlight and fire.
TROUBLESHOOTING No power Ensure the earphone is charged and with enough power for operation. The earphones can be used when it is in charging mode. No sound Ensure the earphone is on. Ensure your Bluetooth device is on. If the volume of the earphones is too low, adjust the volume to an appropriate level. Unable to connect Turn off the Earphone and turn it back on.
SAFETY INFORMATION WARNING Please read these safety warnings and cautions carefully to ensure your personal safety and prevent property damage. Fire and Electric Shock Hazard • Do not expose your Earphone to extremely high or low temperatures. • Do not leave your Earphone in direct sunlight for extended periods of time. •...
Automobile Accident Hazard * Do not leave or store the Earphone or any of its accessories near or over your automobile's air bag because serious injury may result when an airbag deploys. CAUTION • Do not use abrasive cleaners to clean your Earphone because this could cause scratches and damage. •...
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.