ACL CSC400 Installation And Operation Manual page 30

2.7 Solenoid Drivers
2.8 Time Set
2.9 Date Set
2.10 Modbus Settings
2.11 Diagnostics
2.12 Reset SD Log
2.13 Reset TLog
2.14 Reset Settings
2.15 Recalibrate TC
Configuration
Submenus:
2.1.14 4-20 Out
Settings
Days
Reset TMain 2 Timers
Pilot 1 100
Main 1 100
TMain 1 100
Pilot 2 100
Main 2 100
TMain 2 100
Hours
Minutes
12/24 Hour Time
Day
Month
Year
Slave ID
Baud Rate
Format
TLog Rate
Reset SDLog to Default
Reset T Logs to Default
Reset Settings to Default
Recalibrate Thermocouple
inputs
4-20 Out 1 Temp TC1
Low ( 4) -60°C
High(20) 1200°C
Information
Option Reset TMain 2 solenoid timers
Menu Low Power Solenoid Driver settings
Option Duty Cycle time for Pilot 1 solenoid output
Option Duty Cycle time for Main 1 solenoid output
Option Duty Cycle time for TMain 1 solenoid output
Option Duty Cycle time for Pilot 2 solenoid output
Option Duty Cycle time for Main 2 solenoid output
Option Duty Cycle time for TMain 2 solenoid output
Menu
Option Hour for the current time
Option Minutes for the current time
Option Select between 12 or 24 hour time display
Menu
Option Current day
Option Current month
Option Current year
Menu
Option Modbus Slave ID of the CSC400
Option Serial Baud rate for Modbus RTU
Option Serial Format for the CSC400 (eg. "8N1": 8 bits,
No parity bits, 1 stop bit)
Option Period for logging temperatures into Temp Logs
for reading via modbus
Information Shows firmware version and diagnostics
information
Menu
Reset (clear) all stored Shutdown Log entries:
(Yes, No/Cancel)
Menu
Reset (clear) all stored Temperature Log entries:
(Yes, No/Cancel)
Menu
Reset all CSC400 settings to the defaults: (Yes,
No/Cancel)
Menu
Recalibrate Thermocouple inputs (Yes,
No/Cancel)
Menu 4-20mA Output Settings Menu
Option 4-20mA Output 1 Mode Select
Option 4-20mA Output 1 Low value for 4mA
Option 4-20mA Output 1 High value for 20mA
30