11.4 Show manager (USB)
A 'Show' allows you to store all SQ settings and scenes at once, and is used to back-
up the mixer settings, or transfer them to another SQ, using SQ-Drive.
The show manager is located in the 'Utility' screen, in the 'USB Data' tab.
store/recall actions
To store a show to a USB device:
•
Touch the 'Store New' button, you will be prompted to name the show.
To recall a show
•
Touch a show to highlight it (use the touchscreen rotary to change selection or
scroll through all shows) then touch the 'Recall' button.
To rename a scene:
•
Touch a show, then touch in the 'Name' field in the centre of the screen.
To overwrite a scene:
•
Touch the scene to overwrite, then touch the 'Overwrite' button.
Storing or recalling shows is not possible when SQ-Drive is being used for recording or
playback.
Storing or recalling shows will interrupt USB-B streaming.
rename show
shows on SQ-Drive
44
Reference Guide
V1.0.1