Chapter 1Feature Codes; Blacklist - D-Link DVX-2002F User Manual

DVX-2005F IPPBX
Before Reading:
This manual has been written specifically for extension users.
An extension user registered to IP PBX is able to check the system phonebook,
call logs, recordings and faxes
Chapter 1 Feature Codes
Feature codes are special codes that users can dial to access various features on IPPBX
system.
All feature codes introduced below are factory defaults. This chapter will introduce the
most commonly used feature codes such as Blacklist, Pick-up Call, Call Parking, Call
Transfer, Conference, and Voicemail.
If an operation associated with these feature code fails, then please contact your system
administrator to check the feature codes settings as they may have been changed from
default values.

1.1 Blacklist

By setting a Blacklist you can block specific numbers from calling inbound to your IPPBX
system. You can add a number to your blacklist by dialing feature code *75 on your
phone, to remove a number from the blacklist you must dial *075.
The following diagram details the process for adding and deleting numbers from your
blacklist:
1