Paging And Intercom Call - D-Link DVX-2002F User Manual

DVX-2005F IPPBX

1.11 Paging and Intercom Call

On DVX-2005F IP phone system, you can use your extension to make paging/intercom
calls to a group of extension users or a single extension user. The called party will auto
answer on the IP phone in speaker mode and the caller can talk directly to the called
party.
Paging and intercom are almost the same features. The only difference between
paging and intercom is the called party of an intercom call can talk to the caller while
the called party of paging call cannot talk to the caller but instead can only listen.
These 2 features are useful for making an instant announcement over company IP
phones.
Toper form a paging/intercom call to a group of extensions, first please ask your
system administrator to create a group and give you the number of the group. Now
you can make a paging/intercom call. As an example, if you have a group number 660
then you can dial 660# and talk directly on the phone, other extension users within
the group will now hear you from their phones on speaker mode.
The Feature code to perform an intercom to a single extension number is *50, and the
feature code to make a paging call to a single extension number is *51. For example,
you dial *50407#/*51407# and the intercom/paging will be sent to extension number
407.
Notice:
Paging/Intercom feature requires the support of auto-answer feature on your IP
phones, so you can only make paging/intercom call to IP phones extensions. Analog
extensions, soft-phone extensions are unable to make paging/intercom calls.
11