Table of Contents
Advertisement
22
8
4
Ф3
Ф5
Installation of SIM/UIM card:
Firstly power off the MODEM, and press the out button of the SIM/UIM card
outlet with a needle object. Then the SIM/UIM card sheath will flick out at once. Put
SIM/UIM card into the card sheath (Pay attention to put the side which has metal point
outside), and insert card sheath back to the SIM/UIM card outlet.
Warning: Forbid to install SIM/UIM card when powered!
Installation of antenna:
Screw the SMA male pin of the antenna to the female SMA outlet of the
28
25
35
28
58.5
Email:
allen@four-faith.com
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
Four-Faith Smart Power Technology Co., Ltd.
MODEM tightly. Warning: The antenna must be screwed tightly, or the signal quality
of antenna will be influenced!
Installation of cable:
Insert DB9F end of the RS232 data cable into the DB9M interface of MODEM,
and connect the other end with user's device.
The signal connection of the RS232 data cable is as follows:
DB9F
1
RXD 2
TXD 3
4
GND 5
6
7
8
9
RS232 data cable
Tel: +86-17750019379
DB9F
1
2 RXD
3 TXD
4
5GND
6
7
8
9
Web: www.four-faith.hk
Advertisement
Table of Contents
