Antenna port: lightning protection(optional) Standard and Convenience F1403 WCDMA/HSDPA/HSUPA MODEM is a kind of cellular terminal device Support standard RS232 port that can connect to a serial device directly that provides SMS and dial-up function by public WCDMA/HSDPA/HSUPA network.
Four-Faith Smart Power Technology Co., Ltd. 1.4 Specifications Cellular Specification Item Content Cellular Module Industrial cellular module Standard and UMTS/WCDMA/HSDPA/HSUPA 850/1900/2100MHz, Power Input Band 850/900/1900/2100MHz(optional) Item Content GSM850/900/1800/1900MHz Standard Power DC 12V/1.5A GPRS/EDGE CLASS 12 Power Range DC 5~35V Bandwidth HSUPA:5.76Mbps(Upload speed)/ HSDPA:7.2Mbps(Download...
Four-Faith Smart Power Technology Co., Ltd. Chapter 2 Installation Introduction 2.3 Installation and Cable Connection Dimension : (unit: mm) 2.1 General The MODEM must be installed correctly to make it work properly. Warning: Forbid to install the MODEM when powered! 2.2 Encasement List...
Four-Faith Smart Power Technology Co., Ltd. Installation of antenna: 2.4 Power Screw the SMA male pin of the antenna to the female SMA outlet of the MODEM tightly. Warning: The antenna must be screwed tightly, or the signal quality The power range of the MODEM is DC 5~35V.
Four-Faith Smart Power Technology Co., Ltd. Chapter 3 Dial-Up Settings 3.1 MODEM Connection Connect Modem and PC with the shipped RS-232 cable as following: 2. Choose “Modems”, Press “Add” button 3.2 Dial-Up Settings 1. Press “start” “Settings” “Control Panel”, Double click “Phone and Modem...
Page 8
Four-Faith Smart Power Technology Co., Ltd. 4. Manufacture choose ”Standard Modem Types”, Models choose “Standard 33600 bps Modem”, click “Next” button 3. Choose “Don’t detect my modem;I will select it from a list”, and click “Next”...
Page 9
Four-Faith Smart Power Technology Co., Ltd. 5. “Selected ports” choose the actual COM port which connects to Modem, click “Next” button. 6. click “Finish” button, return back to “Modems” page...
Page 10
Four-Faith Smart Power Technology Co., Ltd. 7. Choose the modem you have just installed, click “properties“ button to configure the modem driver...
Page 11
Four-Faith Smart Power Technology Co., Ltd. 9. Choose “Advanced” page, input Extra Initialization commands: 8. Choose “Modem” page, set Maximum Port Speed as 115200. AT+CGDCONT=1,”IP”,”3gnet”,3gnet is the Access Point Name(APN) of China, please replace it with your own APN name, click “Change Default Preferences”...
Page 12
Four-Faith Smart Power Technology Co., Ltd. 10. “Port Speed” choose 115200,”Flow control” choose None, click “OK” button. 11. On the “Advanced” page, click “OK” button return to “Phone and Modems” page, click “OK” button to finish the Modem driver installation...
Page 13
Four-Faith Smart Power Technology Co., Ltd. 12. Finish installing Modem driver, It’s necessary to install the Dial-Up connection. Open “Control Panel”, double click “Network connections”...
Page 14
Four-Faith Smart Power Technology Co., Ltd. 13.Click “Create a new connection” to start creating a new Dial-Up connection. 15.Choose “Connect to the Internet”, click “Next” button 14.Click “Next” button...
Page 15
Four-Faith Smart Power Technology Co., Ltd. 17.Choose “Connect using a dial-up modem”, click “Next” 16.Choose “Set up my connection manually”, click “Next”...
Page 16
Four-Faith Smart Power Technology Co., Ltd. 19.Input the ISP Name , click “Next” button 18.Choose the Modem driver installed just now, click “Next” button...
Page 17
Four-Faith Smart Power Technology Co., Ltd. 20.Input the access number of your ISP. In China, It is *99#. Click “Next” button. 22.Choose “Add a shortcut to this connection to my desktop”, click “Finish” button. 21.Input the username and password. In china they are both null. Click “Next”.
Page 18
Four-Faith Smart Power Technology Co., Ltd. 23.Double click the Dial-Up shortcut on your desktop to run Dial-Up program. 25.Choose the Modem driver installed before, Click “Configure” button 24.Click the “Properties” button of the Dial-Up program...
Page 19
Four-Faith Smart Power Technology Co., Ltd. 27.Click “OK” button to finish Dial-Up program configuration 26.Set “Maximum Speed [bps]” as 115200, set Hardware features as following, click “OK” button...
Page 20
Four-Faith Smart Power Technology Co., Ltd. 28.Click “Dial” button to start dial 29.When dial success, There is a connection icon on the right of your taskbar.
Four-Faith Smart Power Technology Co., Ltd. Chapter 4 SMS Test Modem can also be used to send and receive SMS (Short Message Service) except setting up dial-up connection. To simplify customer program, we supply a DLL(Dynamic Link Library) and sample program source code, all the SMS operations can be processed through simple API functions.
Page 22
Four-Faith Smart Power Technology Co., Ltd. 5. Input the phone to receive this test SMS, click “Send” button 7. When received SMS, It will display in the receive column 6. The result state will display in the Log column 8.Complete SMS test.
Four-Faith Smart Power Technology Co., Ltd. 3. Choose the correct COM port which connects to modem, choose “OK” Chapter 5 Appendix The following steps describe how to setup Windows XP Hyper Terminal and send AT command to modem with it.
Page 24
Four-Faith Smart Power Technology Co., Ltd. 6. Type “AT” in the blank of Hyper Terminal and press “Enter”, the modem will 5. Complete Hyper Terminal operation, It runs as following return “ok”.