Technical Specifications Of Midland Bt1 - Midland BT1 User Manual

Midland BT1 Intercom
Thank you for purchasing the Midland BT1 Intercom, the wireless Intercom system for bikers. The Midland BT1 is designed to be
fitted directly on to your helmet and to be used for communications between driver and pillion. Besides, the driver's unit can be
used to communicate with Bluetooth devices like mobile phones or GPS Sat-Navs.
Both devices are also supplied with a wired connection that can be used to connect an iPod/MP3 player or PMR446 transceiver,which
will then enable bike-to-bike communications up to a maximum range of 5 km.
BT1 - Content of the packaging
› 2 devices: one for Driver and one for Pillion
› 2 audio kits with two stereo speakers, microphone with
boom and wire microphone
› 2 plates with bi-adhesive strip to fix the unit onto the hel-
met
› 2 clamps to fix the unit onto the helmet
› 2 stereo audio cables to connect an iPod/ or other models
of MP3 players
› 1 miniUSB wall-mounting power supply with double plug
› Wind Suppressing Foam Microphone Cover, Allen key and
Velcro strip for assembly
The units included in the packaging are already paired and
can therefore be immediately used in the Intercom mode.
Technical specifications
of Midland BT1
General:
› Bluetooth ver. 2.0 stereo (Headset/Handsfree/A2DP proto-
col)
› AGC system automatically controls the volume in relation
to background noise
› Voice (VOX) or manual communications option
› Private or shared (3-way communications) call mode
› Manual controls to enable: telephone, intercom and wire
connection
› Fully waterproof
› Lithium battery with 8 hours talk time (up to 2 days in stan-
dby mode)
› Recharge time: app. 4 hours
› Dimensions. Length: 87 mm – Width: 47 mm - Thickness:
16 mm
Bluetooth connections:
› Driver's device:
- with pillion's unit, in Intercom mode Driver-Pillion
- with Mobile phone, GPS (Garmin Zumo and TomTom Ri-
der 1 and 2)
› With pillion's device:
- only with the driver's unit in Intercom mode Driver-Pillion
Wire connections for both units:
› For stereo audio input (iPod/MP3 player)
› For PMR446 transceivers (with optional cable)
Attention: before using BT1 for the first time, remember
to recharge it for at least 4 hours.
Attention: Midland BT1 is designed to withstand rain and
water. However, if it is raining, always verify that the rub-
ber caps protecting the sockets are fully fitted.
3