Smart Technologies Smart Board User Manual page 12

6 Press on the SMART Board icon in the menu bar and select Control Panel from the
drop-down menu.
7 In the Boards tab, press the Select button under Serial Ports.
The Pick a Port dialog box will appear.
8 If you know the port to which the interactive whiteboard is connected, select it from the
Port List and press the OK button.
or
If you're unsure of the correct port, press the Auto Detect button to initiate hardware
detection. Your ports will be searched for the presence of an attached interactive
whiteboard until the correct port is located.
The Ready Light in the Pen Tray will change from red to green, indicating the SMART
Board interactive whiteboard is now touch sensitive.
9 Press the Orient button to more accurately map the location of each interactive
whiteboard contact (see page 9 for more information).
x
Preface