Insignia NS-WBRDVD2 Quick Setup Manual

Congratulations on your purchase of a
high-quality Insignia product. Your
NS-WBRDVD2, NS-WBRDVD2-CA,
NS-BRDVD4, and NS-BRDVD4-CA represents
the state of the art in Blu-ray disc player
design and is designed for reliable and
trouble-free performance.
Package contents
• Blu-ray disc player • AAA batteries (2)
• Remote control • User Guide
• Quick Setup Guide
Installing remote control batteries
1 Remove the battery compartment cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
For the most updated User Guide, please visit
www.insigniaproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2011 BBY Solutions, Inc. All rights reserved.
INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of
their respective owners.
Connecting a TV
Using HDMI (best)
TV
Digital connection (optical or coaxial)
NOTE: To select the digital audio output mode, see page 15 of the User Guide.
TV
Back of player
Optical cable
Using composite (good)
NOTE: Composite connections do not provide HD quality video.
TV
Yellow=Video
White=Left audio
Red=Right audio
To connect to a home theater, see your User Guide.
Using Quick Setup
• Press  or  to select Quick Setup, then press
ENTER. The Quick Setup menu opens.
Follow the guide to set the most important
settings for your player.
Connecting to your home network
This player can be connected to your wired network using the Ethernet port on the
back of your player or using a wireless network. Using a wired network provides the
best performance, because the attached devices connect directly to the network and
are not subject to radio frequency interference.
NS-WBRDVD2/NS-WBRDVD2-CA for Wireless Blu-ray Disc Player
and NS-BRDVD4/NS-BRDVD4-CA for Wired Blu-Ray Disc Player
Connecting to the Internet with a wireless network (NS-WBRDVD2 and
NS-WBRDVD2-CA only):
1 Set up your access point or wireless router (if not already set up).
Back of player
2 Turn on your player and your TV.
3 Press  or  to select Settings, then press ENTER. The Settings menu opens.
4 Press  or  to select Network, then press ENTER.
Language
Parental
Settings Network
Display
Audio
Note: The screen shot is only for wireless players.
5 Press  or  to select Network List, then press ENTER. The Network List screen
opens, showing a list of available wireless networks.
Back of player
6 Press  or  to select the wireless network you want your player to connect to.
A Network Setup screen opens with the following options: Password, Connect,
Delete, or Cancel.
7 If your network does not use encryption, press  or  to select Connect, then
press ENTER. If the wireless network is working you should see a checkmark and a
connected message on the TV. If the message does not appear, repeat the steps
above.
OR
If your network uses encryption:
Music a Press  or  to select the Password field, then press ENTER.
An on-screen keyboard opens.
b Press , , , or  to select the first letter in the password, then press
ENTER. Repeat this step to enter the rest of the password. If you make a
mistake, use backspace key to delete the character.
c After you enter the password, select the red "DONE" in the upper left-hand
corner of the keyboard, then press ENTER to close the keyboard.
d Press  or  to select Connect, then press ENTER. A connection message
will appear. Select Close, then press ENTER. If the connection is not
successful, repeat the steps above.
For information on connecting to a wireless network using Wi-Fi Protected Setup
(WPS), see your User Guide.
Quick Setup Guide
Player
Wireless router
Wireless
Network List
System
WiFi Protected Setup(WPS)
Manual
BD-Live
IP Settings