Insignia NS-WBRDVD3 Quick Setup Manual

Congratulations on your purchase of a
high-quality Insignia product. Your
NS-WBRDVD3 represents the state of the
art in Blu-ray Disc player design and is
designed for reliable and trouble-free
performance.

Package contents

• Blu-ray disc player • AAA batteries (2)
• Remote control • Quick Setup Guide
• Important Information Document

Installing remote control batteries

1 Remove the battery compartment cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.

One-year limited warranty

Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289
www.insigniaproducts.com
WE ARE GOING GREEN!
A copy of your User Guide is not provided in
the box but is available online.
Go to www.insigniaproducts.com, click
Support & Service, enter your model
number in the Product Search field,
then click Search.

Connecting a TV

Using HDMI (best)

TV

Using an AV cable

Note: The AV cable can only send standard-definition video (480i) to your TV.
TV
Yellow=Video
White=Left audio
Red=Right audio
A/V cable

Navigating Quick Setup

• Any of these settings can be adjusted later using the SETTINGS menu.
• Services such as streaming video and music require an internet connection.
If connecting now, make sure that your network connection is ready before
proceeding. This also lets you receive automatic firmware updates.
• When there is no disc in your player or your player is in stop mode, the
HOME menu is automatically displayed.
1 Press , , , or  to select QUICK SETUP, then press ENTER.
Page: 1/6 Quick Setup
Welcome to Quick Setup
Press ENTER to perform setup of
basic settings for your player.
ENTER Next Step
2 Follow the on-screen directions to complete the Quick Setup.
Connected Blu-ray Disc Player I NS-WBRDVD3

Connecting to your home network

You can set up a network connection using the on-screen Quick Setup Guide or the
Back of player
SETTINGS menu.
This player can be connected to your wired network using the Ethernet port on the
back of your player or using a wireless network. Using a wired network provides the
best performance, because the attached devices connect directly to the network and
are not subject to radio frequency interference.

Using a wired network connection:

Back of player
Back of player
To connect to a home theater, see your online User Guide.

Connecting to the Internet with a wired network:

1 Connect a network cable to the INTERNET jack on the back of your player and
into a wired router using a commercially available LAN or Ethernet cable.
2 Within the HOME menu, you can use , , , or  buttons on the remote
control to select the SETTINGS, and then press ENTER. The SETTINGS menu
opens.
Display
Audio
Language
Network
System
Security
Use cursor keys to highlight menu and
Enter key to select
3 Press  to select NETWORK, then press ENTER. Under Connection Type option
select WIRED, and press ENTER. A check mark appears in the upper right corner
if the connection is successful.
Quick Setup Guide
Network cable
Wired router
TV Aspect Ratio 16:9 Normal
Resolution Auto
HDMI Color Space Auto
HDMI Deep Color Auto
HDMI 1080p 24Hz Off
HDMI 3D Auto
RETURN HOME Exit